What Happens During a Gearbox Inspection?

onsite machining servicesThe gearbox is one of the most important parts of your vehicle. Without it, you can’t drive your car. So when something starts to go wrong, it’s important to get your gearbox inspected quickly and efficiently. This article is going to provide a brief overview of what happens during a gearbox inspection.

First, let’s discuss a few signs that your car is telling you that you should get your gearbox inspected.

  1. Dragging clutch: If there’s a grinding noise when you’re trying to shift gear, it’s probably because the still-engaged clutch is failing to disengage and is still spinning with the engine. Luckily, this is generally an inexpensive issue to get fixed.
  2. Slipping gears: Your car should be staying in the gear that you put it in until a change is made. If your car is randomly popping out of gear, get your gearbox looked at right away.
  3. Leaking fluids: Fluid is crucial to a properly functioning gearbox, so even if there is a slight leak it’s important to get it taken care of quickly.
  4. “Check engine” light is on: This is one of the easiest ways to tell when you need to take your vehicle in for inspection – your vehicle is telling you to do so! Your “check engine” light may come on for a variety of reasons, so the mechanic will need to utilize onsite machining services and run a diagnostics test to see what code is showing.

So if you are experiencing one of the problems previously discussed or any other problems with your gearbox, it’s time to take your vehicle in for inspection. When you take your vehicle in for gearbox inspection, it’s a fairly simple process. This process is made easy by onsite machining services. Without the technology mechanics have today, it would take much longer to figure out why something isn’t working properly. With machinery manufacturing shipments totaling $407.4 billion in 2012, the amount of mechanical machines in auto shops has only increased since.

Gearbox repair or inspection will begin with paperwork like most vehicle services do. It’s important to fill out any necessary paperwork to ensure you’re paying for the onsite machining services you need and nothing else. Additionally, it’s important to know the mechanic’s gearbox repair cost and policy on tune-ups and re-inspections if needed.

When it’s time to start the inspection, the gearbox first needs to be cleaned. Like most car parts, your gearbox gets dirty with use so it’s important that it is properly cleaned. Additionally, you should ensure that the area the gearbox inspection is going to take place is clean as well. If the gearbox or surrounding area is dirty, there is a chance something important could be missed during the inspection.

And finally, the gearbox is thoroughly inspected by an experienced mechanic. The mechanic will look for signs of corrosion, overheating, oil leaks, and other damages. The foundation fasteners and the cover fasteners of the gearbox will be checked for signs of tightness. Additionally, the input and output shafts will be checked for leaks. Overall, the entire part will be checked for signs of cracking or damage. Any damage that is found will be fixed accordingly.

When looking for someone to conduct your gearbox repair services, it’s important to choose carefully. The gearbox is a vital part of your vehicle and you should ensure you trust only a qualified, experienced technician to do necessary repairs.